Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Front Wheel
$1,399.99
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Rear Wheel
$1,799.99
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 454 NSW Carbon Clincher Disc-Brake Front Wheel
$1,799.99
The 454 NSW Carbon Clincher Disc-brake delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels with the superior modulation and stopping power of disc brakes. The 454 NSW’s undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. Zipp engineers have optimized the biomimicry-derived 454 NSW for the ultimate in all conditions braking control—disc brakes. This marks the first NSW wheelset available for disc brakes, offering cyclists the greatest AeroBalance with the superior modulation and stopping power of disc brakes. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition Disc-brake hubset - ImPress graphics - HexFin ABLC dimple pattern - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 454 NSW Carbon Clincher Disc-Brake Rear Wheel
$2,199.99
The 454 NSW Carbon Clincher Disc-brake delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels with the superior modulation and stopping power of disc brakes. The 454 NSW’s undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. Zipp engineers have optimized the biomimicry-derived 454 NSW for the ultimate in all conditions braking control—disc brakes. This marks the first NSW wheelset available for disc brakes, offering cyclists the greatest AeroBalance with the superior modulation and stopping power of disc brakes. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition Disc-brake hubset - Axial Clutch technology - ImPress graphics - HexFin ABLC dimple pattern - Carbon Clincher - AeroBalance - Handcrafted in the USA
Wheelsmith Double Butted 14/15/14g (Black) Spoke
$70.00
- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50
Wheelsmith Straight 14g (Silver) Spoke
$30.00
- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
Wheels Manufacturing Inc. Axle Spacers
$21.50
Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20
Wahoo KICKR SNAP 142 x 12mm Thru Axle Adapter
$79.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
WTB TCS AL 34mm Presta Valve
$24.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
WTB TCS AL 46mm Presta Valve
$24.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WTB TCS Brass 34mm Valve Stems
$24.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Brass 46mm Valve Stems
$15.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Rim Tape
$14.99 - $24.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Surly Nylon Rim Strip
$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.
Sunlite QR-Tec Disc Front Skewer
$6.99
- Type: Skewer only - Length: 220mm
Sunlite Quick Release Skewer (Front, 100mm)
$9.99
- Replacement steel quick release skewers
Sunlite Quick Release Skewer (Rear, 200mm)
$8.99
• Replacement aluminum quick release skewers
Sunlite WheelGlow Wheel Light
$19.99
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
Sun Ringle ICI-1 Rim
$34.99
- 21.6mm wide Sleeved rim
Stolen Rampage 26-inch Cassette Rear Wheel
$94.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 11T chromoly driver with 3-pawl system.It's designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 11T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00 - $24.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Flow S1
$210.00 - $290.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Neo Front Hub End Caps
$20.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo Replacement Rear Axle
$29.99
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
Stan's NoTubes Presta Removeable Valve Core
$3.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Stan's NoTubes Rim Tape
$15.99 - $19.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Tubeless Valve Stems
$19.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes Universal Kit Rim Tape
$6.99
Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.
Stan's NoTubes ZTR Arch EX Rim
$89.99
Stan's ZTR Arch EX rim combines the lightweight design of their race-specific rims with more internal reinforcements to create a super-strong, stiff rim. The Arch also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Sta-Tru 20-inch Rear Wheel
$59.99
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Page 1 of 3 Next page