Tools/Maintenance

Clean Streak Turbo Bike Chain Degreaser is the quick, no scrub way to remove grease and grime from metal components. This dry-style degreaser features a Jet Sprayer to blast away surface dirt and grime. It’s also perfect for cleaning all hard-to-reach areas. It dries rapidly, requires no water rinsing, and leaves no residue. When used to clean bicycle chains, it prepares the chain for fresh lubricant to be applied. - Use on chains, cassettes, chain rings, & disc brake rotors - Cleans interior & exterior parts of chain - No scrubbing or water rinsing required - Fast drying & leaves no residue - Use outdoors or in a well-ventilated area

- E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring - Center clearance for E-Bike wiring is 0.812". 12-spline 23mm OD tool fittings - Made in the USA

• Fits Sunrace style TIW clusters

- 5 DART plugs for use with the Stan's NoTubes DART tool

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.

This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams

Roughly 70% of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you've reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you'll hardly notice it's there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to a ratchet, to a ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package. - Ti-Torque beam with three separate scales for measuring 2-8Nm - Precision ratchet with convertible magnetic extension - Steel bit extender - S2 steel Hex bits: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm - S2 steel Torx bits: T10, T20, T25 - S2 steel 2mm Phillips head bit - Duck-waxed canvas carrying case measuring 120mm x 70mm x 30mm - Kit weight: 220 grams

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

To adjust preload on Hollowtech II cranksets

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

RockShox, 00.6815.066.020, Reverb post bleed tool

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

RockShox 30mm Seal Kit

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

Holy Cow is the latest in the Rock N' Roll Lubrication's line up of chain lubes. Holy Cow is not flammable and is a very settled wet lube that is as clean or cleaner than most dry lubes. Holy Cow preforms fantastic, like the other Rock N' Roll chain lubes. However, being a little bit of a wet-style chain lube, what little dirt or grit that does get on the chain can be wiped away quickly and easily with the chain looking great again. For all you riders that like to ride with a wet lube but could live better without all the dirt and grit of a wet lube, Holy Cow is just for you.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A worn bicycle chain can cause poor shifting and expensive drivetrain damage. The Park Tool CC-4.2 Chain Checker is a drop-in gauge that measures chain wear accurately. It contacts the chain in three places, eliminating guesswork. Compatible with 5 to 13-speed and single-speed chains, it indicates wear at 0.5%, 0.75%, and 1.0%, matching manufacturer replacement recommendations. - Measures bicycle chain wear accurately, preventing expensive drivetrain damage - Laser-cut design contacts the chain at three points, providing quick and precise wear measurement - Compatible with 5 to 13-speed derailleur chains and single-speed chains - Indicates chain wear at 0.5%, 0.75%, and 1.0%, aligning with manufacturer recommendations for replacement

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool