Parts

The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks

Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)

Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - 49mm chainline - Use of a clutch-style rear derailleur is recommended

CAMO is all about choice - these aluminum alloy rings are made from 7075 Aluminum Alloy for lightweight performance. Only compatible with CAMO spiders. - Requires the use of a CAMO Spider - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with the Race Face Cinch cranksets that have a removable spider

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Compatible only with Hyperglide+ 12-speed chains - For use with any RaceFace CINCH crankset - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset is designed for boost cranksets (52mm chainline)

The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames. - Bronze bushing for smooth lever action - Low-profile ergonomic lever - Stainless steel bolt with spherical washer - CNC machined 6061-T6 aluminum

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

Roadlink Rear Derailleur Part - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x10 Flat Head Screws & Special Nuts Note: Same hanger as Wheels Mfg DROPOUT-1.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

This Wheels Manufacturing Shimano/SRAM Single Speed Conversion Kit includes chain guides for carefree single speeding. Large chain guides sandwich the cog with diameters slightly larger than the cog to keep the chain from hopping off the rear cog. Includes: - (2) - 9mm chain guides - (6) - 3mm spacers - (2) - 1mm shims - (4) - 0.3mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any ½ x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain Note: Does not work acceptably with any 10 or 11-speed chain

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g

Chainring spacer for adjusting the chainline on inner and middle chainrings. - Bag of 20

Loose ball headset bearing retainers. - Grade 300 bearings

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.